Product Description

FCC ID: GQ43VT20T --- PART #: IC: 1470A-1T, 1470A-IT --- FREQUENCY: 315 MHz --- COMPATIBLE W/ THE FOLLOWING VEHICLE(S) --- 2004 2005 2006 2007 2008 2009 2010 TOYOTA SIENNA --- PROGRAMMING --- THIS REMOTE WILL NEED PROGRAMMED TO YOUR VEHICLE BEFORE IT WILL WORK W/ YOUR VEHICLE --- SOME REMOTES CAN BE PROGRAMMED BY YOU & SOME REQUIRE DIAGNOSTIC PROGRAMMING THAT CAN ONLY BE DONE BY A LOCKSMITH OR DEALER (LOCKSMITHS ARE MUCH CHEAPER & EASIER TO DEAL WITH) --- WE SHIP OUR REMOTES WITH INSTRUCTIONS THAT GIVE YOU ACCESS THE PROGRAMMING REQUIREMENTS FOR YOUR VEHICLE. IF YOU WANT TO KNOW IN ADVANCE, PLEASE SEND US THE MAKE, MODEL, & YEAR OF YOUR VEHICLE (via AMAZON MESSAGES) & WE WILL TELL YOU WHERE TO GO TO FIND THE PROGRAMMING REQUIREMENTS FOR YOUR SPECIFIC MAKE, MODEL, & YEAR.

---

Product Details

• Amazon Sales Rank: #54180 in Automotive
• Brand: Toyota
• Model: IC: 1470A-1T, 1470A-IT / RLVTR5002-562

Features

• SAFETY
• SECURITY
• CONVENIENCE
• REMOTELY LOCK & UNLOCK DOOR
• REMOTELY ACTIVATE PANIC ALARM AND OPEN RIGHT & LEFT POWER SLIDING DOOR

---

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Works great and great price!
By David K. Wright
One of our keyless remotes stopped working for our 2008 Sienna. I called the Toyota store and they wanted $142.00 for the keyless remote and $47.50 to program it! I found this one on Amazon and read all the great reviews so I ordered it. I followed the directions on the website they give you to program it (which were easy) and it works great! Saved myself about $150.00!

0 of 0 people found the following review helpful.
worked perfectly
By Dave
easy programming and a fraction of dealer costs.
here's the exact instructions I used and worked for my 08 Sienna:

1) Make sure that the key is not in the ignition, the doors are unlocked, and the driver's door is open.
2) WITHIN 5 SECONDS, without turning, insert and remove key from the ignition twice. (leave key out)
3) WITHIN 40 SECONDS, Close and open the driver door twice. (leave door in open position)
4) Again, insert key into the ignition and remove it. This time only once. (leave key out)
5) WITHIN 40 SECONDS, Close and open the driver door twice, then close the door.
6) Insert key into the ignition and leave it in the LOCK position.
ADD KEY:
A1) Turn the key to "ON" for 1 second, then turn back to "LOCK".
A2) Remove the key.
A3) You’ll hear the doors "LOCK" and 1 second later "UNLOCK" (just listen)
A4) On your remote, press the lock and unlock buttons simultaneously for 1 to 1½ seconds , then let go.
A5) On your remote, IMMEDIATELY press unlock by itself.
A6) You’ll get one of three responses:
R1) You’ll hear the doors "LOCK", then "UNLOCK" once. The remote is accept-ed. If you want to program another remote, immediately proceed to step A4 with your second remote, otherwise open the driver’s door and the re-mote is registered.
R2) You’ll hear the doors "LOCK", then "UNLOCK" twice. Either you didn’t use the same remote in steps A4 and A5(not likely), or this remote was already registered.

0 of 0 people found the following review helpful.
Easy
By Donna Seese
Bought for son and daughter in law - they think it is great! EASY Iin out of car - electronic !